Brix is designed to be small in size yet big in sound, delivering detailed accuracy and stunning clarity.  Versatile for any application, from compact stereo speakers, rear channel speakers in your surround sound system or for use in a second zone, Brix are ideal.  The two-way bass reflex design features a 25mm textile dome tweeter and a 100mm diameter bass driver.  Brix is a little speaker that will offer a dynamic experience.

Specifications:
Frequency Range: 65Hz - 20kHz in room response
Power Handling: Maximum 60 watts RMS amplifier power
Sensitivity: 87dB for 2.83 volts at 1 metre
Configuration: 4 inch 2-way
Bass Driver(s): Fibre reinforced moulded polymer basket with a nominal 100mm (4") doped paper cone. 25mm (1") voice coil wound on high powered aluminium former. Double magnet shielded
Tweeter: 25mm (1") fabric dome. Ferro fluid cooled. Neodymium magnet
Crossover Points: 3kHz
Impedance: Nominally 6 ohms
Enclosure Type: Bass reflex, rear vented
Dimensions: 230mm high x 150mm wide x 190mm deep
Material: 12mm MDF
Finish: Vinyl or lacquered timber veneer
Volume: 3 litres internal
Weight: 3kg each
Mounting: Provisions made for bracket mounting

Developed to dispel the myth that small speakers cannot sound big, the Equinox delivers phenomenal sound for size.  For use in any high fidelity application, the Equinox has no competition in this class.  Featuring ultra low flux leakage shielding on the 130mm bass driver and 28mm tweeter, the Equinox can be placed close to your television.  Equinox are a phenomenal experience. 

Specifications:
Frequency Range: 45Hz - 20kHz in room response
Power Handling: Maximum 100 watts RMS amplifier power
Sensitivity: 88dB for 2.83 volts at 1 metre
Configuration: 5 inch 2-way
Bass Driver(s): Cast aluminium basket with a nominal 130mm (5") doped curvilinear paper cone. 25mm (1") voice coil wound on high powered aluminium former, with copper shorting ring. Vented and double magnet shielded
Tweeter: 28mm (1") doped fabric dome. Ferro fluid cooled. Double magnet shielded
Crossover Points: 1.8kHz
Impedance: Nominally 6 ohms
Enclosure Type: Bass reflex, rear vented
Dimensions: 295mm high x 175mm wide x 235mm deep
Material: 12mm MDF with internal bracing
Finish: Vinyl or lacquered timber veneer
Volume: 8 litres internal
Weight: 6kg each
Mounting: Provisions made for bracket mounting

The KDX system is designed primarily for a 5, 6 or 7 channel digital sound experience, but is also the basis for a high quality stereo system in a compact bookshelf design.  The KDX system, comprises the KDX-M (main/rear) and the KDX-C (centre).  The major focus is to provide precise timbral matching to the left, centre, right and rear channel which is achieved by using identical cabinets, dual 130mm bass drivers and 26mm tweeter for each loudspeaker.  Available as pairs (KDX-M) or as a single unit (KDX-C) the digital dimension is a must to experience.

Specifications:
Frequency Range: 50Hz - 20kHz in room response
Power Handling: Maximum 110 watts RMS amplifier power
Sensitivity: 89dB for 2.83 volts at 1 metre
Configuration: Point source dual 5 inch 2-way
Bass Driver(s): Fibre reinforced moulded polymer baskets with 2 x nominal 130mm (5") doped paper cones. 25mm (1") voice coil wound on high powered aluminium former. Double magnet shielded
Tweeter: 26mm (1") fabric dome. Ferro fluid cooled
Crossover Points: 2.6kHz. The major focus of the KDX-M / KDX-C system was to provide precise timbral matching to all 5 channels, by using identical cabinets, bass drivers and tweeters for each speaker. The only difference is found in the crossover network for the KDX-C, because the centre channel is horizontally aligned and placed on top of a television or in a cabinet. This creates additional low frequency for which the crossover compensates.
Impedance: Nominally 6 ohms
Enclosure Type: Bass reflex, rear vented
Dimensions: 185mm high x 435mm wide x 265mm deep
Material: 17mm MDF
Finish: Vinyl or lacquered timber veneer
Volume: 14 litres internal
Weight: 9kg

Neuphonix is involving, high energy, get up and move sound.  Be excited by these elegantly refined speakers.  The unique six driver arrangement has been designed for unprecedented reactive sound.  Four custom designed 130mm bass drivers have speed, clarity and high power handling.  With a single 130mm dedicated midrange and 26mm super audio tweeter you have extended frequency response to 40kHz.  The bass response is exceptional; just see if you can stay seated.

Specifications:
Frequency Range: 30Hz - 40kHz in room response
Power Handling: Maximum 200 watts RMS amplifier power
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: 6 driver 3-way bi-wirable / bi-ampable
Bass Driver(s): 4 x nominal 130mm (5") coated paper cones. 26mm (1") voice coil wound on high powered aluminium former provides good linearity and driver control at large cone excursion
Midrange Driver: 1 x nominal 130mm (5") coated paper cone. 26mm (1") voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion
Tweeter: 26mm (1") dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion
Crossover Points: 340Hz & 2.5kHz
Impedance: Nominally 4 ohms
Enclosure Type: Dual chambers - sealed midrange chamber, with bass reflex main chamber, rear vented with internal / external flaring
Dimensions: 1065mm high x 230mm wide x 430mm deep
Material: 19mm MDF enclosure, heavily braced, with 25mm MDF front baffle
Finish: Lacquered timber veneer
Volume: 68 litres internal
Weight: 31kg each

The Phoenix have risen from the ashes of what was unquestionably Krix's most awarded and respected loudspeaker, the Lyrix / Lyrix Gold. Tonal depth, imaging and balanced musicality are highlights in this slim floorstanding design. Involve yourself in the experience of sound with the  Phoenix .

Specifications:
Frequency Range: 35Hz - 20kHz in room response
Power Handling: Maximum 150 watts RMS amplifier power into 4 ohms
Sensitivity: 90dB for 2.83 volts at 1 metre
Configuration: Point source dual 6½ inch 2 way bi-wirable / bi-ampable
Bass Driver(s): Fibre reinforced moulded polymer baskets with 2 x 165mm (6½") doped paper cones. 25mm (1") vented magnet, voice coil wound on high temperature aluminium former
Tweeter: 28mm (1") doped fabric dome. Ferro fluid cooled. Double magnet shielded
Crossover Points: 1.9kHz
Impedance: Nominally 4 ohms
Enclosure Type: Bass reflex, rear vented with internal / external flaring
Dimensions: 935mm high x 205mm wide x 320 deep
Material: 17mm MDF, heavily braced
Finish: Vinyl or lacquered timber veneer
Volume: 39 litres internal
Weight: 19kg each

The Seismix 3 active subwoofer is a compact design and is very room friendly regarding placement.  Seismix 3 has a 200 watt amplifier with adjustable volume and low pass controls on the rear panel.  The front firing 250mm bass driver was designed with an emphasis on musicality and true low frequency performance.  Enhance your movie experience with Seismix 3 deep bass.

Specifications:
Frequency Range: 22Hz - 150Hz (-6dB) in room response
Bass Driver(s): Nominal 255mm (10") diameter paper cone driver developed for high level, low frequency reinforcement
Amplifier Power: 200 watts RMS into the nominal 4 ohm driver Maximum instantaneous power 400 watts
Amplifier S/N Ratio: >70dB
Distortion - Input to Speaker: <0.1% - @ 80 watts RMS
Line Level Inputs: Left Input (mono) Low - 900mV RMS for maximum output, High - 100mV RMS or Left + Right Input (stereo) Low - 450mV RMS for maximum output, High - 50mV RMS
Output: 120dB maximum SPL in room response
Auto Power On / Off: 15 minute delay before switching to standby after no input signal
Phase Select: 0º or 180º (relative to input signal)
Enclosure Type: Bass reflex, front vented
Dimensions: 415mm high x 360mm wide x 390mm deep
Material: 17mm MDF
Finish: Vinyl or lacquered timber veneer
Weight: 18kg