QUAD Speakers
 

The 11L2 is a studio-quality bookshelf / stand-mount loudspeaker with a flat, monitor-like performance and remakable bandwidth. The design incorporates the latest technology including an aluminium voice coil and low-reflection bass driver chassis. With a superbly integrated mid-range, the 11L2 is both refined and exciting, with class-leading detail and imaging.


Specifications:
Transducer Complement
- 2 Way
Cone Bass Driver - 125mm / 5"
Cone Bass / Mid Driver - n/a
Soft Dome Tweeter - 25mm / 1
Nominal Impedance - 6 Ohms (compatible with 8 Ohm amplifier outputs)
Frequency Response - (-6dB) 45Hz - 28kHz
Upper Limit - (-10dB) 32kHz
Power Handling (Continuous) - 85W
Power Handling (Recommended Amplifier) - 30-150W
Enclosure type - Ported
System Fb - 55Hz
Crossover Frequency(s) - 2.2kHz
Construction - 15/25mm MDF
Dimensions (H x W x D) - 310 x 190 x 243mm
 
 

Specifications:
Transducer Complement
- 2 Way
Cone Bass Driver - 2 x 125mm / 5
Cone Bass / Mid Driver - n/a
Soft Dome Tweeter - 25mm / 1
Nominal Impedance - 6 Ohms (compatible with 8 Ohm amplifier outputs)
Frequency Response - (-6dB) 90Hz - 28kHz
Upper Limit - (-10dB) 32kHz
Power Handling (Continuous) - 70W
Power Handling (Recommended Amplifier) - 30-120W
Enclosure type - Sealed
System Fb - 60Hz
Crossover Frequency(s) - 2.0kHz
Construction - 15/25mm MDF
Dimensions (H x W x D) - 163 x 428 x 206mm
 
 

Leading the L2 series range is the 22L2. With a huge dynamic range and frequency bandwidth, it offers class-leading perfomrance throughout the frequency spectrum. Bass response bottoms out at an impressive 30Hz. When positioned exactly 350mm from a rear wall, the in-room response is flat to this level, with no compromise of the mid-range or high-frequencies. These loudspeakers produce exceptional results with the most challenging music genres, especially large scale orchestral and rock.


Specifications:
Transducer Complement
- 2.5 Way
Cone Bass Driver - 170mm / 6.5
Cone Bass / Mid Driver - 170mm / 6.5
Soft Dome Tweeter - 25mm / 1
Nominal Impedance - 6 Ohms (compatible with 8 Ohm amplifier outputs)
Frequency Response - (-6dB) 30Hz - 28kHz
Upper Limit - (-10dB) - 32kHz)
Power Handling (Continuous) - 150W
Power Handling (Recommended Amplifier) - 50-300W
Enclosure type - Ported / Sealed Mid
System Fb - 35Hz
Crossover Frequency(s) - 150Hz, 3kHz
Construction - 15/25mm MDF
Dimensions (H x W x D) - 850 x 205 x 278mm

 
 

An exceptionally refined unit, the L sub can be used to great effect within both stereo and multi-channel systems. If your penchant is for stand-mount speakers but you find the bass response too limited, the addition of the L sub will provide the necessary sub-sonics to enhance your enjoyment.
Although a sub-woofer can be placed anywhere in a room as bass frequencies are essentially non-directional in nature, you may choose to leave the L sub a little more exposed. The same high-gloss piano finish is applied to the subs making them as attractive as they are sonically adept. Features of the L sub include an extremely high power 300WRMS amplifier module, a choice of six discrete filter paths, from 35Hz to 85Hz in 10 Hz steps, a full feature remote control, microprocessor controlled volume and four memory settings which can be set and recalled from the remote.


Specifications:
Type
- Powered subwoofer
Bass Driver - 12
Amplifier Power output - 300w (RMS)
Frequency Range (boundry) - 25Hz - 90Hz (-6dB)
Max Power Output - 113dB at 1m
Low pass filter range - 35Hz - 85Hz (10Hz increments)
Input Impedance - 1kOhm
Facilities - Full remote, Phase, volume, power, high and low inputs
Gross Weight - 31.6Kg
Net Weight - 29Kg
Size (h x w x d) - 525 x 340 x 465mm